Harnesses & Restraints

The Brey Krause Model R-9540 Universal Fire Extinguisher Mount is designed to bolt onto most factory and aftermarket seats. The universal, independently adjustable design ensures fitments onto most applications. If you can't find a fire extinguisher mount designed specifically for your vehicle, you need...

The B24 is the most economical bolt-in bracket offered. It is a heavy-duty Steel bracket that cannot be bent to aid installation. Dimensions are 5mm thick, 69x46mm with a 13mm (1/2") bolt hole. There is a slight 10° bend so that this bracket can...

The innovative Brey Krause R-1046 Harness Mounting solution for the 981 Porsche Cayman makes use of limited space for an installation that neither limits seat travel, nor produces too much of a harness angle. By utilizing the factory Porsche cross-member located directly behind the...

The Schroth Bolt-In B23A Kit is a set of bolt in brackets that are usually sewn into 2" Lap belts. We call it a "Rallye End" kit because it usually comes on the street legal Rallye style belts. Like the 01323 kit, it is...

RaceQuip Window Net are constructed of heavy-duty 1" polypropylene webbing and nylon thread for maximum durability. Jig-built construction techniques ensure consistent size, shape, and fit. Available in black and red. The standard size is 18"x24" which will fit most window openings. Exceeds SFI 27.1...

The Brey-Krause Model R-1015 Harness Guide Bar fits the 1974-1993 Porsche 911 Targa. Brey-Krause harness guide bars for the Porsche 911 Targa properly locates the racing shoulder harness relative to the driver. Harness guides also prevent excessive shifting and fatigue of the driver during...

The easily installed (and removed) Sparco Arm Restraints use a heavy duty webbing and standard D-Ring style retention clips. Comfortable padding completely surrounds the arm to ensure a comfortable fit. Technical Information Part Number: SP158SET Manufacturer: Sparco

SCHROTH offers this high quality Schroth Interior Net for the best in driver safety. Attaches to the cage of your race car. Made of polyester, these nets will last longer than competitor's nylon nets - Polyester is not as susceptible to UV degradation over...

G-Force Snap in fitting for 2" or 3" harness belts. Requires eye-bolt for complete installation (not included). Technical Information Part Number: GF107H Manufacturer: G-Force

The Racequip Window Net Mounting kit features a popular GM-style seat-belt latch release. 27.5" bar can be trimmed to fit just about any application. Includes everything pictured, including the mounting tabs - some welding required. Note: Kit includes flat bottom rod. Technical Information Part...

The G-Force Eyebolt Kit can be used with G-Force Snap-in hooks to help install your harness set. The 22mm bolt has a 7/16"-fine thread and a 1/2" eyelet. Technical Information Part Number: GF109H Manufacturer: G-Force

Reinforcement plates are used to reinforce a bolt or eye-bolt mounting point when installing a harness in a non-factory location. G-Force Reinforcement Plates are constructed from a 1/8 inch thick steel plate measuring 4 x 4 inches with a pre-drilled 7/16" hole. Note: Reinforcement...

The Harness Buckle (also known as a 3-Bar Slide) is necessary for securing the loose end of a harness. Select 3" size for most harness lap and shoulder belts, or 2" for HNR-style shoulder harness or sub-belts. Technical Information Part Number: LOBUCKLE2, LOBUCKLE3