Data Logging Accessories

Full sized SIM card for SmartyCam, Garmin, other devices that use standard SIM cards. 64GB   (Image is for example purposes only. Brand and version may differ)

Introducing the new Garmin Catalyst 2 Race Track Driving Performance Optimizer Designed with a bright 3-inch display and a built-in camera, Garmin Catalyst 2 easily mounts on the windshield and brings on-track coaching features to the cockpit, including Garmin's unique True Optimal Lap, which shows...

Cigarette Lighter/Aux power socket adapter for Garmin Catalyst - with cable

3.5 meter cable to connect Garmin Catalyst to a Remote Cam.

Use the AIM Data Hub to extend the capabilities of your AiM data logger without occupying any more channels or running more cables to your dash. Connect up to four CAN peripherals to each AIM Data Hub. You can even "stack" Data Hubs, connecting...

GPS technology represents a true revolution in racing data acquisition. Now, thanks to the AIM GPS09 Module and Race Studio 3 software, as soon as you start your track session you can immediately sample lap and split times as well as speed, position and...

Hardwire your Garmin Catalyst to your vehicle with the Garmin Catalyst Bare Wire Power Cable. 

Connecting to the ECU allows the AiM unit access to data collected by your ECU (RPM, road speed, coolant temperature, and throttle position are typical; many ECUs offer much more information). Works with the following AiM displays with the male 5-pin CAN connector: AiM...

This special AC adapter cable from AiM has a 5-pin 712 (screw-in) connector at one end. It has three different applications: MyChron5 kart dash: Use this cable to power your MyChron5 dash and charge the battery without removing the battery from the dash. If you...

Expand the capabilities of your AiM Dash with the AiM 22 Pin Expansion Harness.   Allows for an addition direct 4 channels, a second CAN feed, output signal and more. Technical Information Part Number: AIMV02573020 Manufacturer: AiM

The Garmin Catalyst Extra Car Kit is for those drivers that have a second (or third!!) vehicle and want to move their Catalyst from car to car. No need to buy a new unit!   This kit includes all the accessories, mounts, cables and fittings...

The AiM ACC3 is a compact Analog CAN converter the comes in two versions: ACC3, which works with all AiM devices, and ACC3 Open, which works with other non-AiM devices.   This is the replacement for the AiM Channel Expansion and is more powerful, more...

The AiM GPS08 module further expands the track mapping abilities of AiM data loggers and data logging dashes. In addition, the GPS08 allows lap timing (even split times) without the use of trackside beacons, storing data for up to 50 tracks with up to...

Take the tedious effort out of your PDM installation with a quality PDM Wiring harness. This starter harness will provide you with all the input and output wires pre-terminated into the PDM plugs. The AMP connectors are all terminated, booted, and heat shrunk. The...

The AiM LCU1S Lambda controller range of products allow you to perfectly tune the carburetion of your engine as well as keep it at its best, appreciably improving your car performances. All AiM LCU-One lambda controllers use a wide band Bosch LSU 4.9 probe both...

CAN Cable specifically for the AiM Shift Light Module and SmartyCam 3 cameras. Comes in various lengths. 5 pin MALE to 5 pin MALE Part Number: AIMV02554xxx Manufacturer: AiM

The AiM Memory Module is a small SD Card holder that can be connected via CAN bus to the following AiM loggers: MXL2, MXG, MXG 1.2, MXS, MXS 1.2, MXP, EVO4S, EVO5. Its management is really very simple: just connect the AiM Memory Module to your...

The AiM Shift Light Module is a compact array of ten RGB LEDs which help monitoring RPM thresholds, alerts and other indicators. It can be helpful when you have a logger but not a dash, or even in case your dash is positioned where...

The AIM CAN Channel Expansion Hub allows you to connect up to four analog sensors (or a combination of analog sensors and up to 2 digital sensors) to the CAN data port on your AiM data logger. Combined with the AiM 4-Port CAN Data Hub ,...

Based on the AIM MXS Dash, the AIM MXS Strada Digital Dash is a barebones system that displays gobs of data on its compact 5" digital display. The easy to read back-lit display is fully configurable with multiple pages and features custom alarms and...