Longacre Liquid Filled Tire Gauge - 0-60 PSI

The Longacre Liquid Filled Tire Gauge offers all of the features of the popular Deluxe gauge, but with a self-venting liquid filled design for increased accuracy (see below). Featuring a glow-in-the-dark face and high-flow pressure release button, the clear and easy to read gauge holds the pressure reading until it is released - no more bending over double trying to see the pressure! Convenient swivel chuck allows for easy use in all condition. Note: All Longacre gauges now include both Angle (installed) and Ball-style chucks.

About Liquid Filled Tire Gauges

All pressure gauges - liquid filled and regular - need to be vented to the outside to read accurately. If not vented, as the surrounding temperature changes, they will build up pressure inside and affect the accuracy - by as much as 2-3 psi! But if a liquid filled gauge is vented it will leak on your hands and in your tool box. Some manufacturers are aware of this and don't vent the gauge. You then have to deal with the variation in accuracy.

Longacre's Liquid Filled Tire Gauge has a specially designed pressure equalizer valve on the top of the gauge. Before you use the gauge just loosen the knob on top of the gauge 1/4 turn, then hand retighten. Instantly any temperature-caused pressure difference will be eliminated and you will be guaranteed the most accurate readings possible.

If you have a liquid filled tire gauge prove it to yourself. Take your gauge that has been in a cool place and in the typical range you use. Then take the gauge and put it out in the sun for about 45 minutes, as would happen during a race. Then re-check the tire that is still in the cool place. You will see that the reading has changed. You know that the pressure in the tire is the same so the gauge reading must now be off. How will this affect your handling to have tire pressures high or low by several psi? What's worse is that you don't know at what temp the gauge is actually correct! It depends on the temp in the factory when it was manufactured. You could remove the rubber fill plug on the gauge. But then the liquid would leak out.

Technical Information