Description
Take the tedious effort out of your PDM installation with a quality PDM Wiring harness. This starter harness will provide you with all the input and output wires pre-terminated into the PDM plugs. The AMP connectors are all terminated, booted, and heat shrunk. The entire trunk line has about 6 inches of heat shrink on it, then the 8 analog data inputs come out with shrink on each individual channel. The AiM proprietary CAN has 2 standard Binder 719 female connectors so the use of standard AiM expansions like the PDM GPS, data hubs, channel expansions, and more is plug and play. Inputs 9 through 12 are white flying leads for connection to switches, ignition, hazards, etc. The user configurable CAN1, CAN2, and LIN are blue/white flying leads for connection to ECUs, controls, or other devices.
Power outputs are 14 AWG Tefzel wire for the half-bridge, high, and mid power outputs. The low power outputs are all 16 AWG Tefzel wire. Wires are all red in color, approx. 10′ long, labeled, and ready for your routing, covering, and termination.
Custom configurations of this harness are available and priced individually.
Technical Information
| Part Number: | AIMPDM32-Harness |
| Manufacturer: | AIM |
