Data, Timing & Video
We take the guesswork out of your data system!
We don’t just sell data systems, we design them for your application, configure everything, and provide a detailed schematic and layout list to make installation as “plug and play” as possible.
Plus we can provide at track and remote system training and driver coaching to whatever level you need!
-
AiM 22 Pin Expansion HarnessExpand the capabilities of your AiM Dash with the AiM 22 Pin Expansion Harness. Allows for an addition direct 4 channels, a second CAN feed, output signal and more. Technical Information Part Number: AIMV02573020 Manufacturer: AiM
- $400.00
- $400.00
- Unit price
- per
-
AIM 712-712 Patch CableThe AIM 712-712 Patch Cable is a Genuine AiM Patch cable with a 712 5 pin male binder connection on one end, and 712 5 pin female binder connections on the other end. Use these patch cables to Channel Expansions to each other, or...
- $57.00
- $57.00
- Unit price
- per
-
AIM 712-719 Patch CableThe AIM 712-719 Patch Cable is a Genuine AiM Patch cable with a 712 4-pin male binder connection on one end, and 719 4-pin female binder connections on the other end. Use these patch cables to connect sensors to Channel Expansions, directly to an...
- $48.00
- $48.00
- Unit price
- per
-
AIM 719-719 Patch CableThe AIM 719-719 Patch Cable is a Genuine AiM Patch cable with 719 4-pin male binder connection on one end and a 719 4-pin female binder connection on the other. Use these patch cables as extensions from sensors to logger input cables. Comes in...
- $32.00
- $32.00
- Unit price
- per
-
AIM CAN Channel ExpansionThe AIM CAN Channel Expansion Hub allows you to connect up to four analog sensors (or a combination of analog sensors and up to 2 digital sensors) to the CAN data port on your AiM data logger. Combined with the AiM 4-Port CAN Data Hub ,...
- $288.00
- $288.00
- Unit price
- per
-
AiM Infrared Tire Temp SensorAiM Infrared Tire Temp Sensor. IR Sensor to measure your tire and/or pavement temperatures to give you a more accurate idea of what's happening with your tires. Part Number: AIMX05TTS01B0 Manufacturer: AiM Data Sheet
- $140.00
- $140.00
- Unit price
- per
-
AIM LCU1S Lambda ControllerThe AiM LCU1S Lambda controller range of products allow you to perfectly tune the carburetion of your engine as well as keep it at its best, appreciably improving your car performances. All AiM LCU-One lambda controllers use a wide band Bosch LSU 4.9 probe both...
- $499.00
- $499.00
- Unit price
- per
-
AIM Memory ModuleThe AiM Memory Module is a small SD Card holder that can be connected via CAN bus to the following AiM loggers: MXL2, MXG, MXG 1.2, MXS, MXS 1.2, MXP, EVO4S, EVO5. Its management is really very simple: just connect the AiM Memory Module to your...
- $205.00
- $205.00
- Unit price
- per
-
AIM PDM32 Wiring HarnessTake the tedious effort out of your PDM installation with a quality PDM Wiring harness. This starter harness will provide you with all the input and output wires pre-terminated into the PDM plugs. The AMP connectors are all terminated, booted, and heat shrunk. The...
- $1,250.00
- $1,250.00
- Unit price
- per
-
AIM Shift Light ModuleThe AiM Shift Light Module is a compact array of ten RGB LEDs which help monitoring RPM thresholds, alerts and other indicators. It can be helpful when you have a logger but not a dash, or even in case your dash is positioned where...
- $249.00
- $249.00
- Unit price
- per
-
AiM Shift Light Module and SC3 CableCAN Cable specifically for the AiM Shift Light Module and SmartyCam 3 cameras. Comes in various lengths. 5 pin MALE to 5 pin MALE Part Number: AIMV02554xxx Manufacturer: AiM
- $57.00
- $57.00
- Unit price
- per
-
AiM SmartyCam Cable w/ext micAiM SmartyCam cable w/ext. microphone. Connects an AiM SmartyCam to the CAN bus, dash logger or Solo2 DL and has an externa mic so you can move the sound that the SmartyCam receives to any location you want. 712 5-pin to 712 7-pin connection...
- $77.00
- $77.00
- Unit price
- per
-
AiM SmartyCam Cable w/ext mic jackAiM SmartyCam cable w/ext. mic. jack. Connects an AiM SmartyCam to the CAN bus, dash logger or Solo2 DL and has a jack to connect an external Mic (not included). 712 5-pin 712 7-pin connection ends plus jack connector. Comes in 2m and 4m...
- $77.00
- $77.00
- Unit price
- per
-
AiM SmartyCam CAN CableConnects your AiM SmartyCam 2.1 to your Channel Expansion or Data Logger. Available in 2m or 4m lengths. Part Number: AIMV025660x0 Manufacturer: AiM
- $58.00
- $58.00
- Unit price
- per
-
AiM SmartyCam GP Bullet Mount KitThis kit is for the SmartyCam GP HD Bullet Camera. The SmartyCam GP Roll Bar Bullet Mount Kit holds the small bullet camera from the SmartyCam GP safely and securely. The V-shaped Roll-Bar specific mount fits bars ranging in size from 1-2.1″. The adjustable...
- $72.00
- $72.00
- Unit price
- per
-
AiM SmartyCam GP Roll Bar KitThis kit is to mount the recording unit from the SmartCam GP HD to a roll bar. The SmartyCam GP Roll Bar Mount Kit holds the recording unit from the SmartyCam GP safely and securely. The V-shaped Roll-Bar specific mount fits bars ranging in...
- $73.00
- $73.00
- Unit price
- per
-
AIM Solo 2 Mounting PlateUse this AiM Solo 2 mounting plate To Mount Your AiM Solo 2 and Solo 2 DL into different vehicles easily. The AiM Solo Replacement Mount Plate includes all hardware and is a Genuine AiM Product. The magnets on the back of the AiM Solo...
- $16.50
- $16.50
- Unit price
- per
-
AIM Steering Angle Sensor - String, 719Steering Angle Sensor String potentiometer, 10" stroke, 719 4-pin/m Part Number: AIMLX-PA-10-AIMSP Manufacturer: AiM
- $252.00
- $252.00
- Unit price
- per
-
AIM Temp Sensor - M10-719Temperature Sensor TR oil/water temp., M10 (0.8mm) 719, 2K resistor Part Number: AIM3CVTRM1003C2K Manufacturer: AiM
- $85.00
- $85.00
- Unit price
- per
-
AIM Temp Sensor 1/8" NPT - 719Temperature Sensor TR oil/water temp., 1/8 NPT (27) 719, 2K resistor Part Number: AIMX05NPTA4513BPRS Manufacturer: AiM
- $85.00
- $85.00
- Unit price
- per
