Featuring an all new softer material, the latest Sparco Victory 2.0 Boot Cut suit continues to feature Sparco’s patented Hocotex material, a single layer fabric with the fire protection of a multi-layer suit! Thanks to this brilliant material, the Sparco Victory Boot Cut is twice as breathable as a traditional layered racing suit. The thinner fabric also allows for increased flexibility, further aided through stretch arm gussets sewn into the shoulders. The Victory combines this added protection, mobility, and breathability with five vibrant color options and is the only single layer suit capable of passing both the SFI 3.2a/5 and FIA 8856-2000 homologations.
How does Hocotex work? Racing suits are traditionally constructed using layers of fabric sewn together with a quilted pattern. This quilting creates pockets of air between the layers which expands in a fire, providing thermal protection for the driver. Hocotex uses a honeycomb structure with over 60,000 internal air cells that provide a 10 to 12% increase in heat protection. Compare this to the 300 quilted chambers found in a traditional suit and the difference is clear!
|Rating:||FIA 8856-2000, SFI 3.2A/5|
|Layers:||1 (See Notes Below)|
|Fabric:||Hocotex (Fire Resistant)|
|Fabric Weight:||330-360 gr/sqm|
• Soft and Lightweight construction is twice as breathable over a standard suit.
• *Hocotex Single Layer Construction offers SFI & FIA rated Multi-Layer Protection.
• Hidden pockets.
• Large rear anti-abrasion stretch panel.
• Boot-cut pant legs with hidden standard elastic cuffs.
Note: All measurements are in inches. Your ideal size will be the smallest size that includes your largest measurement.
Sizing Tips: A Driving Suit should have a loose, comfortable fit and allow for a full range of motion. Make sure the fit doesn’t change when sitting down! A suit that fits tightly may sacrifice the protective layer of air between the suit and your skin/underwear and can potentially decrease the level of protection provided by your suit. Driving suits do not “break-in” or stretch over time.
A. Chest: Measure around the fullest part, under the armpits, keeping the tape horizontal.
B. Waist: Measure around the natural waist line, inline with the navel.
C. Hip: Measure around the fullest part of your hips, about 20cm below the waist line.
D. Shoulders: Arms at your sides, run tape measure from bone to bone.
E. Sleeve (Arm Length): Measure from shoulder to wrist. F. Inseam: Standing against a wall, measure from the crotch to the bottom of your leg.
G. Back: Measure lowest vertebrae of the neck to the waist.