Aim

** The AIM Solo 2 DL is available in 3 different connection versions: ** Solo 2 DL OBDII- Connects to ECU via OBDII Port with OBD Cable Solo 2 DL CAN - Connects to ECU via CAN/RS232 Connection that is hard-wired into CAN/RS232 Communication channels....

Temperature Sensor TR oil/water temp., 1/8 NPT (27) 719, 2K resistor Part Number: AIMX05NPTA4513BPRS Manufacturer: AiM

Connect your AiM Solo2 DL to the OBDII port in your car for easy data-logging of your OBDII vehicle data. One end has a male K-Line (OBDII) plug to fit your car's OBDII diagnostic port, and the other end has a 7-pin 712 (screw-in)...

The AIM 712-712 Patch Cable is a Genuine AiM Patch cable with a 712 5 pin male binder connection on one end, and 712 5 pin female binder connections on the other end. Use these patch cables to Channel Expansions to each other, or...

The AIM 719-719 Patch Cable is a Genuine AiM Patch cable with 719 4-pin male binder connection on one end and a 719 4-pin female binder connection on the other. Use these patch cables as extensions from sensors to logger input cables. Comes in...

This Universal RAM Suction Cup Mount kit is designed to work together with the AIM Solo and Solo 2 GPS Laptimer as well as the APEX Pro Digital Driver Coach units. The 3.25" rubber suction-cup offers an extra-strong hold on any smooth non-porous surface....

If you routinely move your Solo2 DL from one car to another and need another harness for only power or both power and data input, this is your cable. If you are putting a Solo2 DL into an older vehicle and need a power...

The new AiM SmartyCam 3 Corsa in both 67° and 84° upgrades the AiM SmartyCam HD 2.1 with 1920×1080 FHD Video recording at 60 frames per second and 2 TB SD Card capacity. Highlights:  USB-C connection USB-C port, placed in the side flap, makes...

The new AiM SmartyCam 3 GP in both 67° and 84° takes the AiM SmartyCam GP 2.2 to a whole new level. With 1920x1080 FHD Video recording at 60 frames per second, 2 TB SD Card capacity, Video Output, CAN Connection and more.  Highlights: ...

AiM SmartyCam cable w/ext. microphone. Connects an AiM SmartyCam to the CAN bus, dash logger or Solo2 DL and has an externa mic so you can move the sound that the SmartyCam receives to any location you want. 712 5-pin to 712 7-pin connection...

Connects your AiM SmartyCam 2.1 to your Channel Expansion or Data Logger. Available in 2m or 4m lengths. Part Number: AIMV025660x0 Manufacturer: AiM    

CAN Cable specifically for the AiM Shift Light Module and SmartyCam 3 cameras. Comes in various lengths. 5 pin MALE to 5 pin MALE Part Number: AIMV02554xxx Manufacturer: AiM

The RAM Roll Bar Camera Mount Kit holds both digital video and still cameras safely and securely. The V-shaped Roll-Bar specific mount fits bars ranging in size from 1-2.1″. The adjustable ball-and-socket system not only lets you put your camera right where you want...

The AIM 712-719 Patch Cable is a Genuine AiM Patch cable with a 712 4-pin male binder connection on one end, and 719 4-pin female binder connections on the other end. Use these patch cables to connect sensors to Channel Expansions, directly to an...

Temperature Sensor TR oil/water temp., M10 (0.8mm) 719, 2K resistor Part Number: AIM3CVTRM1003C2K Manufacturer: AiM

Use the AIM Data Hub to extend the capabilities of your AiM data logger without occupying any more channels or running more cables to your dash. Connect up to four CAN peripherals to each AIM Data Hub. You can even "stack" Data Hubs, connecting...

GPS technology represents a true revolution in racing data acquisition. Now, thanks to the AIM GPS09 Module and Race Studio 3 software, as soon as you start your track session you can immediately sample lap and split times as well as speed, position and...

The new SmartyCam 3 SPORT camera has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED. SmartyCam 3 SPORT camera overlays all the data from both GPS and AiM loggers connected to your ECU. With AiM's Race...

Connecting to the ECU allows the AiM unit access to data collected by your ECU (RPM, road speed, coolant temperature, and throttle position are typical; many ECUs offer much more information). Works with the following AiM displays with the male 5-pin CAN connector: AiM...

This special AC adapter cable from AiM has a 5-pin 712 (screw-in) connector at one end. It has three different applications: MyChron5 kart dash: Use this cable to power your MyChron5 dash and charge the battery without removing the battery from the dash. If you...