Products

Pressure Sensor AiM 0-150psi pressure sensor, 1/8" NPT, 719 4-pin/m Part Number: AIMPRS-837/AIMX05PSA00150P18 Manufacturer: AiM

Pressure Sensor KA 0-15psi pressure sensor, 1/8" NPT - 719 4-pin Part Number: AIMPRS-832 Manufacturer: AiM

Pressure Sensor KA 0-2000psi pressure sensor, 1/8" NPT, 719 4-pin/m Part Number: AIMPRS-839/AIMX05PSA02000P18 Manufacturer: AiM

Pressure Sensor KA MAP 50psi pressure sensor, 1/8" NPT, 719 4-pin Part Number: AIMPRS-831/AIMX05PSA00050P18 Manufacturer: AiM

Expand the capabilities of your AiM Dash with the AiM 22 Pin Expansion Harness.   Allows for an addition direct 4 channels, a second CAN feed, output signal and more. Technical Information Part Number: AIMV02573020 Manufacturer: AiM

The AIM 712-712 Patch Cable is a Genuine AiM Patch cable with a 712 5 pin male binder connection on one end, and 712 5 pin female binder connections on the other end. Use these patch cables to Channel Expansions to each other, or...

The AIM 712-719 Patch Cable is a Genuine AiM Patch cable with a 712 4-pin male binder connection on one end, and 719 4-pin female binder connections on the other end. Use these patch cables to connect sensors to Channel Expansions, directly to an...

The AIM 719-719 Patch Cable is a Genuine AiM Patch cable with 719 4-pin male binder connection on one end and a 719 4-pin female binder connection on the other. Use these patch cables as extensions from sensors to logger input cables. Comes in...

The AiM ACC3 is a compact Analog CAN converter the comes in two versions: ACC3, which works with all AiM devices, and ACC3 Open, which works with other non-AiM devices.   This is the replacement for the AiM Channel Expansion and is more powerful, more...

The AIM CAN Channel Expansion Hub allows you to connect up to four analog sensors (or a combination of analog sensors and up to 2 digital sensors) to the CAN data port on your AiM data logger. Combined with the AiM 4-Port CAN Data Hub ,...

Use the AIM Data Hub to extend the capabilities of your AiM data logger without occupying any more channels or running more cables to your dash. Connect up to four CAN peripherals to each AIM Data Hub. You can even "stack" Data Hubs, connecting...

We will help you set up, troubleshoot and understand the basic use of your AiM System, including a high level understanding of the use of AiM Software RaceStudio 3. This price is for a 1/2 hour session and only for users that have NOT...

The AiM GPS08 module further expands the track mapping abilities of AiM data loggers and data logging dashes. In addition, the GPS08 allows lap timing (even split times) without the use of trackside beacons, storing data for up to 50 tracks with up to...

GPS technology represents a true revolution in racing data acquisition. Now, thanks to the AIM GPS09 Module and Race Studio 3 software, as soon as you start your track session you can immediately sample lap and split times as well as speed, position and...

The AIM GS-Dash is the next evolution of the popular G-Dash. The GS-Dash has been designed to show data sampled by the new generation of AiM loggers, EVO4S and EVO5: all data coming from your vehicle ECU, from the GPS, from your sensors, as well as from...

AiM Infrared Tire Temp Sensor. IR Sensor to measure your tire and/or pavement temperatures to give you a more accurate idea of what's happening with your tires. Part Number: AIMX05TTS01B0 Manufacturer: AiM Data Sheet

The AiM LCU1S Lambda controller range of products allow you to perfectly tune the carburetion of your engine as well as keep it at its best, appreciably improving your car performances. All AiM LCU-One lambda controllers use a wide band Bosch LSU 4.9 probe both...

The AiM Memory Module is a small SD Card holder that can be connected via CAN bus to the following AiM loggers: MXL2, MXG, MXG 1.2, MXS, MXS 1.2, MXP, EVO4S, EVO5. Its management is really very simple: just connect the AiM Memory Module to your...

The AIM MXG Dash Data Logger showcases the future of in-car logger systems! The full-color, high-contrast, extra-wide 7" TFT LCD display features fully customizable pages, allowing the user to choose from a vast library of page styles, and define exactly which data to be...

The AiM MXm Dash Logger is a compact-sized, fully featured dash logger for racers needing ECU or engine sensor data while having the option of adding multiple HD cameras. From Spec Miata to Porsche GT3, the new AiM MXm is ready to monitor and...